Ugreen Releases a 3C1A 65W Gallium Nitride Charger to Solve Charging Problem for Users Who Have Many Devices
The gallium nitride charger market is getting hotter and hotter, and various products are emerging one after another. Recently, a gallium nitride charger with the maximum output power of 65W has been put on the market. It is very rare to integrate four output interfaces of 3C1A. While satisfying as many new digital products as possible, one USB-A port is reserved to improve compatibility and avoid inconvenience in use.
Ugreen 3C1A gallium nitride charger has a square structure in appearance, and stripes are designed on both sides of the micro drum to increase the grip friction, and Ugreen trademark “UGREEN” is printed on the bright side in the middle, which looks gentle and low-key. The maximum output power is 65W, and the interface configuration has four output ports, which is a rare 3C1A interface configuration in the market.
In terms of performance, Ugreen gallium nitride charger USB-C1/USB-C2 supports power blind insertion, and the maximum output performance of 65W can be obtained by inserting any one of them. It supports five fixed voltage outputs of 5V3A/9v3A/12V3A/15V3A/20V3.25A, and also has a set of PPS: 3.3-21V3A; USB-C3 supports 5V3A/9V2A/12V1.5A output with a maximum power of 18W；; USB-A supports 4.5v 5a/5v 4.5a/5v 3a/9v2a/12v1.5a, sharing the same path with USB-C3. In addition to supporting USB PD fast charging, it also has common fast charging protocols such as QC, FCP, SCP, APPLE2.4A, etc.
Ugreen 3C1A gallium nitride charger is manufactured based on PI GaN technology, with dimensions of 107.2mm * 108.5mm * 39.5mm and weight of 172g. compared with traditional charger, the square shape has a certain reduction in size. compared with the strip gallium nitride charger with a crooked sword, the square shape design will be more stable and not easy to loose when used on the wall plug.
It can be seen from the internal structure diagram provided by Green Link that Ugreen 3C1A gallium nitride charger does not pursue the limit of small size, but adopts the traditional tiled circuit board structure design. Compared with the stacked circuit board structure, the advantage of tiled structure is that there is a certain space between various parts to avoid heat accumulation and improve the overall heat dissipation effect to achieve the purpose of low temperature and fast charging.
For the convenience of users, Ugreen 3C1A gallium nitride charger supports the global voltage of 100-240V~50/60Hz, so cross-regional travelers need not worry about the voltage problem. In addition, two-leg folding pins are used on the pins, so that the pins can be accommodated in the shell when being carried, thereby avoiding scratching with luggage and articles, saving backpack space and reducing the burden of going out.
Compared with products of the same level, Ugreen 3C1A gallium nitride charger has four output ports, which can output four devices at the same time when facing multi-device applications, and there is no need to queue up to replace the devices in turn for charging. Built-in intelligent power distribution strategy, the simultaneous output power of dual C is adjusted to 45W+18W, USB-C1/C2+A is adjusted to 45+18, and the simultaneous output of four ports is adjusted to 18W+18W+5V3A, which is suitable for different occasions.
Ugreen 3C1A 65W gallium nitride charger has been put on the official flagship store, and the price is 149 yuan. It has three USB-C interface configurations that are rare in the market, which can meet the charging requirements of more PD devices. One USB-A interface is reserved to facilitate the use of other devices. In addition, A port also supports SCP low-voltage and high-current fast charging, which can meet the needs of users, whether it is the high power demand of laptops or the simultaneous charging of multiple devices.