Baseus Releases a 65W GaN2 Pro Gallium Nitride Charger, Which Is Smaller and Easier to Use
The rapid popularization of gallium nitride chargers cannot be separated from the strong support of major brands, and both mobile phone brands and third-party accessory manufacturers play an important role in this storm of gallium nitride popularization. As the TOP 1 seller of double eleven gallium nitride chargers in 2019, Beisi has successively launched multi-port gallium nitride chargers such as 65W, 45W and 120W, covering different user layers. After a year’s experience, upgraded its 65W GaN charger, which is the most popular one, and launched the second generation of Baseus 65W GaN2 Pro GaN charger.
As the second generation of 65W multi-port gallium nitride products, Baseus GaN2 Pro charger follows the family ID design in appearance, and has been redesigned both inside and outside. It is small and equipped with new heat dissipation technology and BPSII charging technology, and its volume is further reduced.
As a classic 2C1A 65W charger, the output power configuration of two PD interfaces in the old version is 65W and 30W, which belongs to the large and small power scheme. If the user plugs in the wrong interface, the best charging performance may not be obtained. Two PD output ports of Baseus GaN2 Pro gallium nitride charger are replaced with mainstream power blind plug-in scheme. Type-C1 and Type-C2 can get the maximum 65W PD fast charge output by plugging in one port at will, so users can experience better without learning.
The volume has also been upgraded. The dimensions of the Bix GaN2 Pro gallium nitride charger are 70mm * 36mm * 32mm, which is reduced from 75mm to 70mm compared with the old version, and the power density is increased to 0.80 W/cm, reaching the current mainstream level.
The most important thing for multi-port chargers is how to adjust the output strategy of each interface. Baseus GaN2 Pro gallium nitride charger is equipped with Baseus self-developed BPSII charging technology, which intelligently adjusts the output status of each interface, supports single-port, dual-port and three-port simultaneous output, and can charge up to three devices at the same time.
The charger of Baseus generally has a characteristic, that is, it has rich fast charging protocols, and the same is true of Baseus GaN2 Pro gallium nitride charger. It has output voltage files such as 4.5V5a/5V4.5a/9V3a/12V3a/15V3a/20V3.25a, and supports PD3.0, PD2.0, 5A PPS, QC3.0, QC2.0, SCP, FCP, etc.
Compared with the old version, Baseus GaN2 Pro gallium nitride charger is basically completely redesigned. The manufacturer is changed to Shenzhen Xiwei Technology, and it is now in the pre-sale state. The package contains a 5A E-mark wire, and the price is 148 yuan. The estimated delivery time is August 18th. Interested partners can pay attention to it.